NEC Express5800/140Rc-4, User Manual

Page: 172 / 400

5-16 Installing the Operating System with Express Setup
4.
Specify "Complete memory dump" and modify [Dump file:] in the
[Write debugging information] group box.
e.g. Write the debug information in D drive write the file name "MEMORY.DMP".
D:\MEMORY.DMP
5.
Click [Settings] on the [Performance] group box.
The [Performance Options] window appears.
6.
Click [Advanced] tab on the [Performance Options] window.
7.
Click [Change] on the [Virtual memory] group box.
8.
Modify [Initial Size] in the [Paging file size for selected drive] box to the value larger than
[Recommended], and click [Set].
IMPORTANT:
„
Be sure to create memory dump with the size described above on
the OS partition. If [Default Size] of the paging file is specified
to the value smaller than "Recommended" value, the correct debug
information (memory dump) may not be collected.
„
For more information on "Recommended" value, see "Partition
Size to be Created" described earlier.
„
To prepare for the situation when any trouble occurred, we
recommend you to press dump switch to confirm that the dump
will be collected normally in advance.
„
In case the memory is expanded, re-specify the paging file to suit
the new memory size.
9.
Click [OK].
The message to restart the system may appear according to the modified specification.
In such case, follow the message to restart the system.