NEC Express5800/140Rc-4, User Manual

Page: 314 / 400

9-28 Upgrading Your Server
7.
Remove the expansion slot cover.
IMPORTANT:
Keep the expansion slot cover being removed
carefully.
8.
Remove the dust cover.
IMPORTANT:
Keep the dust cover being removed carefully.
9.
On the edge opposite the connectors, grasp the board by both corners. Orient the board to
the vacant hot-plug slot so that the metal retention bracket is toward the rear of the
chassis.
10.
Insert the board into the front and rear retention mechanisms. Carefully push the board
until it engages and fully seats in the slot connector.
IMPORTANT:
If the board cannot be installed easily, remove the
board once and then reinstall it. Excess force added to the board may
cause the board to be broken.
11.
Close the front and rear latches.
NOTES:
„
Make sure that the tab is firmly locked. If the tab is unlocked, the
PCI slot does not operate normally since the power is not supplied
to the PCI slot.
„
The insulators are installed between the PCI board slots. They are
for protecting the PCI board already been installed. Take care not to
remove or damage the insulator when installing or removing the
PCI board. If the insulator is taken off, reinstall the insulator in
place.
Lock
Tab