NEC Express5800/140Rc-4, User Manual

Page: 152 / 400

4-42 Configuring Your Server
The following table lists submenu items, available parameter, and descriptions.
Submenu item Parameter Description
Reset SCSI Bus at
IC Initialization [Enabled]
Disabled Select "Enabled".
Display <Ctrl><A>
Message During
BIOS Initialization [Enabled]
Disabled Select "Enabled".
Extended Int 13
Translation for DOS
Driver > 1 GByte [Enabled]
Disabled Select "Enabled".
POST Display Mode Verbose
Silent
[Diagnostic]
Select "Diagnostic".
SCSI Controller Int
13 Support
[Enabled]
Disabled:
NOT Scan
Disabled:
scan bus
Enable or disable SCSI BIOS.
Select "Enabled" for most cases other than the
following:
•
To boot the OS from a hard disk connected to
any other controller than SCSI controller on
the baseboard. (If the controller on the
baseboard has no hard disks connected, there
is no problem.)
•
BIOS of the SCSI controller may be disabled to
reserve an area in the expansion ROM space
if the controller has no hard disks connected.
Domain Validation [Enabled]
Disabled Select "Enabled".
Support Removable
Disks under Int 13
as Fixed Disks Boot Only
All Disks
[Disabled] AIC-78xx BIOS automatically controls the
removable disks.
BIOS Support for
Bootable CD-ROM [Enabled]
Disabled Select "Enabled".
[ ]: Factory-set