NEC Express 5800, User Manual

Page: 289 / 719

Hardware
289
TPM Configuration
The following screen is displayed by selecting
“TPM Configuration” in Advanced Menu . It is
available only when the model supports TPM,Trusted Platform Module.
Refer to the following table for the items.
Item Parameter Description
TPM SUPPORT
(Note 1)(Note 4)
[Disable]
Enable Set Disable/Enable for TPM
(Trusted Platform Module)
function.
TPM State
(Note 1)(Note 2)(Note 4) [Disable]
Enable Set Disable/Enable for TPM
operation
Pending TPM operation
(Note 3)(Note 5) [None]
Enable Take Ownership
Disable Take Ownership
TPM Clear Set Disable/Enable for the
schedule of TPM operation.
This specify the command
which will be issued at next
boot
TPM Enabled Status - Display the setting for TPM
function (display only)