NEC Express 5800, User Manual

Page: 706 / 719

XVI
32 00 No defect spare location available
32 01 Defect list update failure
33 00 Tape length error
34 00 Enclosure failure
35 00 Enclosure services failure
35 01 unsupported enclosure function
35 02 enclosure services unavailable
35 03 enclosure services transfer failure
35 04 enclosure services transfer refused
36 00 Ribbon, ink, or toner failure
37 00 Rounded parameter
39 00 Saving parameters not supported
3A 00 Medium not present
3A 01 Medium not present: tray closed
3A 02 Medium not present: tray open
3B 00 Sequential positioning error
3B 01 Tape position error at beginning-of-medium
3B 02 Tape position error at end-of-medium
3B 03 Tape or electronic vertical forms unit not ready
3B 04 Slew failure
3B 05 Paper jam
3B 06 Failed to sense top-of-form
3B 07 Failed to sense bottom-of-form
3B 08 Reposition error
3B 09 Read past end of medium
3B 0A Read past beginning of medium
3B 0B Position past end of medium
3B 0C Position past beginning of medium
3B 0D Medium destination element full
3B 0E Medium source element empty
3B 0F End of medium reached
3B 11 Medium magazine not accessible
3B 12 Medium magazine removed
3B 13 Medium magazine inserted
3B 14 Medium magazine locked
3B 15 Medium magazine unlocked
3D 00 Invalid bits in identify message
3E 00 Logical unit has not self-configured yet
3E 01 Logical unit failure
3E 02 Timeout on logical unit
3F 00 Target operating conditions have changed
3F 01 Microcode has been changed
3F 02 Changed operating definition
3F 03 Inquiry data has changed
40 00 RAM failure
40 nn Diagnostic failure on component nn
41 00 Data path failure
42 00 Power-on or self-test failure
43 00 Message error