NEC Express 5800, User Manual

Page: 489 / 719

489
2.10.1 Enable/Disable Component
Enable/Disable Component is displayed by selecting
“Fault Information” and clicking
“Enable/Disable” of the menu on the left side of the screen.
Hardware unit status (Enable/Disable) can be checked and Enable/Disable setting can be
performed manually in
Enable/Disable Component .
(1) Display/set Enable/Disable status.
Displayed contents are as follows.
Setting : Enable/Disable status
Name : Disable sensor name
(2) Clicking “Submit” enables to set the information of (1).
(3) Clicking “Cancel” enables to move to Fault Information screen.
(1)
(2) (3)
IMPORTANT:
 If the non-redundant hardware unit is set to “Disabled”, the
server cannot be booted.

If the hardware unit which has previously set to “Disabled” is
set to “Enable” at the time of failure, the same hardware unit
failure may reoccur it may temporarily recover.