NEC Express 5800, User Manual

Page: 707 / 719

XVII
44 00 Internal target failure
45 00 Select or reselect failure
46 00 Unsuccessful soft reset
47 00 SCSI parity error
48 00 Initiator detected error message received
49 00 Invalid message error
4A 00 Command phase error
4B 00 Data phase error
4C 00 Logical unit failed self-configuration
4D nn Tagged overlapped commands (nn = queue tag)
4E 00 Overlapped commands attempted
50 00 Write append error
50 01 Write append position error
50 02 Position error related to timing
51 00 Erase failure
52 00 Cartridge fault
53 00 Media load or eject failed
53 01 Unload tape failure
53 02 Medium removal prevented
54 00 SCSI to host system interface failure
55 00 System resource failure
55 01 System buffer full
57 00 Unable to recover table-of-contents
58 00 Generation does not exist
59 00 Updated block read
5A 00 Operator request or state change input (unspecified)
5A 01 Operator medium removal request
5A 02 Operator selected write protect
5A 03 Operator selected write permit
5B 00 Log exception
5B 01 Threshold condition met
5B 02 Log counter at maximum
5B 03 Log list codes exhausted
5C 00 RPL status change
5C 01 Spindles synchronized
5C 02 Spindles not synchronized
5D 00 Failure prediction threshold exceeded
5D FF Failure prediction threshold exceeded (false)
5E 00 Low power condition on
5E 01 Idle condition activated by timer
5E 02 Standby condition activated by timer
5E 03 Idle condition activated by command
5E 04 Standby condition activated by command
60 00 Lamp failure
61 00 Video acquisition error
61 01 Unable to acquire video
61 02 Out of focus
62 00 Scan head positioning error
63 00 End of user area encountered on this track