MODE KWU Installation Instructions Download Page 1

Page: 1 / 5

Accessory Installation Instruction

630497_1

KWU for KS1150 Model

The Kitset Wall Unit (KWU) for the KS1150 models is a sheetmetal support structure designed to make the

installation of the KS1150 Peninsula and the KS1150 LH-RH Corners more straightforward.

Once assembled, it will support wall cladding of up to 500kg without transferring load to the fire.

Summary of Contents for KWU

Page 1: ... Wall Unit KWU for the KS1150 models is a sheetmetal support structure designed to make the installation of the KS1150 Peninsula and the KS1150 LH RH Corners more straightforward Once assembled it will support wall cladding of up to 500kg without transferring load to the fire ...

Page 3: ... M6 Washer 3 7 x M8 Bolt 7 x M8 Nut 14 x M8 Washer Set the top onto the two sides and affix Attach the 2 x hangers as cross braces across the back Slide the KS1150 Peninsula or KS1150 LH or RH Corner into the KWU The holes on each side are to assist with access while sliding the fire in ...

Page 4: ...odel 6 2 x M6 Nut 2 x M6 Washer 5 Use Bend Tool 4 x 8 5 8 Screws 7 Use the supplied bend tool to bend the tabs on the top front of each side Affix the front panel in place at the top Use the supplied 8 5 8 screws to affix the KWU onto the fire 2 screws per side ...