Viper TX – Operation Instructions
37
AP-75710, Rev. 1.1, 09/01/2008
Step 6 :
Draw a line, holding your pen in the same position against the adjustment plate as you did in
position 1.
Step 7 :
Check if there is a gap between the 2 lines and do the correct action.
IF there is …
THEN …
a gap between the lines.
perform the adjustment procedure*
NO gap between the lines.
no adjustment is necessary.
* For the adjustment procedure, Refer to Adjusting the roll units
3.5.2.3 Adjusting the roll units
Procedure :
Step 1 :
Use the correct amount of spacers (2) to cover the space between the drawn lines (1).
1 = Drawn lines
2 = Spacer
Downloaded From ManualsPrinter.com Manuals
