Viper TX – Operation Instructions
54
AP-75710, Rev. 1.1, 09/01/2008
4.5 INSTALLING THE FABRIC
4.5.1 Installing the fabric roll and empty core
Procedure :
Step 1 :
Determine the printable side of the fabric roll (inside or outside printing) and lay down the fabric
roll as shown in the images below.
Step 2 :
Position the fabric roll in the middle of the printing space. Use the numbers indicated on the roll
unit bar to position the fabric roll. (See image below)
1 = Fabric roll
2 = Numbers on the roll unit bar
Step 3 :
Position the roll units of the unwinder in such a way that the fabric roll can be placed in between.
1 = Roll unit handle
2 = Roll unit
3 = Fabric roll
Step 4 :
Lock one roll unit to the roll unit bar
Downloaded From ManualsPrinter.com Manuals
