Viper TX – Operation Instructions
48
AP-75710, Rev. 1.1, 09/01/2008
4.3 SWITCHING THE POWER ON/OFF
Caution
•
Before powering ON the unit for the first time, make sure to:
o
Remove the dummy cassettes,
o
Remove the waste tube clamps,
o
Remove the bag enclosing the waste tubes,
o
Connect the waste tubes and
o
Remove the head lock bracket
4.3.1 Switching the power ON (Printer)
Step 1 :
Press the [POWER] key of the operation panel, to turn the unit ON. The arrow on the image
below indicates the [POWER] key.
•
The POWER LED (1) of the operation panel will light green.
1 = Power LED
Step 2 :
Wait until the unit has initialized.
Notes
•
If there are any problems during the initial start-up operation, the unit will display a message on the
operation panel, and the operation may stop. If the operation stops, refer to Troubleshooting and take
the appropriate actions.
Downloaded From ManualsPrinter.com Manuals
