Viper TX – Operation Instructions
12
AP-75710, Rev. 1.1, 09/01/2008
1.5 WARNING LABELS
The handling, attachment locations, and types of warning labels are explained below.
Warning labels are attached on areas which require attention. Read and understand the positions and
contents thoroughly before performing your work.
1.5.1 Handling the warning labels
Be sure to note the following when handling the labels.
Notes
•
Make sure that all labels can be recognized. If text or illustrations cannot be seen clearly, either clean
or replace the label.
•
When cleaning labels, use a cloth with water or neutral detergent. Do not use a solvent or gasoline.
•
If a warning label is damaged, lost or cannot be recognized, replace the label. When replacing
warning labels, contact your local MUTOH dealer.
1.5.2 Warning and operation procedure labels on front side.
Downloaded From ManualsPrinter.com Manuals
