Viper TX – Operation Instructions
17
AP-75710, Rev. 1.1, 09/01/2008
2 PRODUCT OVERVIEW
2.1 PART NAMES AND FUNCTIONS
2.1.1 Front
No. Name
Function
1
Operation panel
Sets the operational conditions, the status of the printer, and other
functions.
2
Ink compartment
This is the place for installing ink cassettes.
3
Front cover
Keeps the operator safe from the drive parts of the printer while it is
operating. Only open and/or close the cover to perform following
operations:
¾
Fabric setting and replacement
¾
Maintenance of the printer
¾
Cleaning
the
printer
4
Pressure rollers
To press the fabric from above and keep it flat when printing.
5
Maintenance cover
Protects users from electric shocks caused by touching the internal
electrical parts. The cover is opened when expansion memory
(optional) has to be installed, and is closed for normal use.
6
Stand
Used to install the printer on a flat surface.
¾
Standard with the unit is the UW/W 100.
7
Gutter
To catch the rest ink.
8
Foot switch
Used to control the UW/W 100.
9
Additional coated feeding
cylinder
Support the fabric during printing
10
Maintenance cover left
Cover which can be opened easily for daily maintenance.
11
Maintenance cover left
under
Cover which can be opened easily for daily maintenance.
12
Core (empty) of the winder
Winding the printed fabric
13
Swingbar
To keep the fabric under tension
14
Roll unit
Roll units of the UW/W 100
15
Operation panel UW/W 100
Controls the UW/W 100
16
PCB Box
PCB Box of the UW/W 100
Downloaded From ManualsPrinter.com Manuals
