Viper TX – Operation Instructions
83
AP-75710, Rev. 1.1, 09/01/2008
6
PRINTER MENU
6.1 VERIFYING THE PRINTER STATUS
The status of the printer is explained below.
6.1.1 Normal (Idle)
Indicates that the printer can receive print data when fabric is loaded.
You can also change printer settings using the operation panel.
The content displayed on the LCD monitor of the operation panel is as follows.
1
→
Ready to print
2
→
Feed Cleaning
←
3
4
→
Cancel Lever
Up
←
5
6
→
User 1
xxxm
←
7
No. Position
Description
1
1st line
Displays the current status of the printer. Depending on the status, the
contents may be displayed in 2 to 4 lines.
2
Left of 2nd line
Displays the function assigned to [F1] key.
3
Right of 2nd line
Displays the function assigned to [F2] key.
4
Left of 3rd line
Displays the function assigned to [F3] key.
5
Right of 3rd line
Displays the function assigned to [F4] key.
6
Left of 4th line
Displays the currently set fabric type.
7
Right of 4th line
Displays the approximate amount of remaining fabric that is currently
set. (Units: m)
However, the amount is displayed only when either "Roll fabric 1",
"Roll fabric 2", or "Roll fabric 3" is selected in the Roll fabric setting
menu.
6.1.2 Setup menu display
In the Setup menu, changes can be made to the printer settings. The contents displayed on the LCD monitor
of the operation panel is as follows.
1
→
* SetupMenu *
2
→
InkStatus OriginSet
←
3
4
→
TestPrint FabricSet
←
5
(1/7)
←
6
No. Position
Description
1
1st line
Displays the setting menu name currently set.
2
Left of 2nd line
Displays the function assigned to [F1] key.
3
Right of 2nd line
Displays the function assigned to [F2] key.
4
Left of 3rd line
Displays the function assigned to [F3] key.
5
Right of 3rd line
Displays the function assigned to [F4] key.
6
4th line
Displays the currently available functions of the [F1] key to the [F4] key.
Displays the page status if there are multiple pages for the currently
displayed setting menu.
Downloaded From ManualsPrinter.com Manuals
