Viper TX – Operation Instructions
20
AP-75710, Rev. 1.1, 09/01/2008
2.1.4 Operation Panel of the winding system
The operation panel is used to set operational conditions of the UW/W 100.
No.
Name
Function
A
/
Part of the operation panel controlling the unwinder 100.
B
/
Part of the operation panel controlling the winder 100.
1
Print Side Selector
In case you loaded fabric with printable side on the outside select
‘OUT’, otherwise select ‘IN’.
2
Unwinder 100 mode switch
Toggle between Manual and Automatic mode.
Manual
3
Unwinder 100 LED
Automatic
LED lights up when pushing one of the buttons
Motor turns: LED flashes.
Motor is off: LED is out.
Outside printing
Inside printing
4
Backwards button
Roll-off unwinder
Roll-up unwinder
5
Forwards button
Roll-up unwinder
Roll-off unwinder
Manual
6
Winder 100 LED
Automatic
LED lights up when pushing one of the buttons
Motor turns: LED flashes
Motor is off: LED is out.
7
Winder 100 mode switch
Toggle between Manual and Automatic mode.
Outside printing
Inside printing
8
Backwards button
Roll-off winder
Roll-off winder
9
Forwards button
Roll-up winder
Roll-up winder
10
Power LED
Lights up when the system is powered ON.
Downloaded From ManualsPrinter.com Manuals
