Viper TX – Operation Instructions
77
AP-75710, Rev. 1.1, 09/01/2008
Caution
•
Do not spill water next to the spitting box.
Step 8 :
Place the mesh back into the spitting box.
Step 9 :
Press the ENTER key when done. The carriage will automatically go to its home position.
* WiperClean *
Changed
wiper?
→
ENTER
5.3.6 Cleaning around the heads
When to perform?
Cleaning around the heads must be performed weekly.
Caution
•
Only use Mutoh water based textile cleaning liquid.
•
Only use swabs of the Good shape kit.
Step 1 :
Power ON the printer and go to the WiperClean Setup Menu. This will cause the unlocking of the
carriage.
* WiperClean *
Changed
wiper?
→
ENTER
Step 2 :
Open the left maintenance covers by loosening the four screws.
Step 3 :
Slide the carriage slowly into the left maintenance area.
Downloaded From ManualsPrinter.com Manuals
