User’s Guide – Osprey 75/102/130
Chapter 5: Preparations before printing
95
AP-75102, Rev. 2.0, 28/11/2007
5.4 PRINTING FLOW
The following chart illustrates the procedure for drawing with the printer. Refer to each item as necessary.
1. Make the printing data
Make the printing data using application software (RIP).
↓
2. Switch ON the printer and load media into the printer.
Refer to: “Media handling”
Refer to: “Using media”
↓
3. Perform head cleaning before printing.
Refer to: “Head cleaning before printing”
↓
4. Make the preference setting for printing with the printer.
Refer to: “Menu setup on the operation panel”
↓
5. Start printing.
Refer to: “Operating from the operation panel”
↓
6. Perform after-printing operations.
Refer to: “Operations after printing”
Notes
•
Do not open the front cover during printing. Doing so may stop the printer to print.
Though the printer resumes printing after you close the front cover, the quality of printing cannot be
guaranteed.
