User’s Guide – Osprey 75/102/130
Chapter 6: Printer menu
114
AP-75102, Rev. 2.0, 28/11/2007
6.5.1 Setup menu 1/5
6.5.1.1 Origin setup menu
Sets printing start position (origin) for printing data.
Set this when you want to re-print to blank area of the printed media by changing the layout of the printing data.
Setup items
Parameters
Descriptions
Origin Set
•
L: Media feed value
•
W: Print head
movement value (Unit:
mm)
Change print head position and media feed
amount by operating the following keys.
•
[F1] key: Increase setup value L
•
[F2] key: Increase setup value W
•
[F3] key: Decrease setup value L
•
[F4] key: Decrease setup value W
•
[ENTER] key:
Determines the setup values.
The print head moves to drawing start point.
The following messages are displayed on the
operation panel.
Setup items
Parameters
Descriptions
Origin Set
Origin Position check
Confirm origin position and
push ENTER.
•
[ENTER] key: Determines the setup values.
The print head returns as before. The
operation panel returns to the normal status.
Notes
•
The print head automatically returns after none of the keys are pressed for a certain period (5 sec.)
while checking the origin position, to avoid that the print head is drying out.
