User’s Guide – Osprey 75/102/130
Chapter 5: Preparations before printing
88
AP-75102, Rev. 2.0, 28/11/2007
Step 5 :
Select an item among the following and press the appropriate key, from [F1] key to [F4] key.
Setup items
Parameters
Descriptions
Setup
Perform Setup List printing.
Refer to: “Setup List”
SetupALL
Perform Setup list, the User Paper list, and the Print Mode
list printing.
Refer to: “Setup List”
Nozzle Chk 1
Perform Nozzle check 1 (horizontal line) pattern printing.
Refer to: “Nozzle Check”
Test Print (1/4)
Nozzle Chk 2
Perform Nozzle check 2 (step line) pattern printing.
Use this function when it is difficult to check if there is any
clogging of nozzles, missing dots, or faint printing by using
Nozzle check 1 pattern.
Refer to: “Palette”
Uni-Qlty 1
To print an adjust pattern in quality mode, unidirectional-
single path.
Refer to: “Alignment”
Uni-Qlty 2
To print an adjust pattern in quality mode, unidirectional-
double path.
Refer to: “Alignment”
Uni-Spd 1
To print an adjust pattern in speed mode, unidirectional-
single path.
Refer to: “Alignment”
Test Print (2/4)
Uni-Spd 2
To print an adjust pattern in speed mode, unidirectional-
double path.
Refer to: “Alignment”
Bi-Qlty 1
To print an adjust pattern in quality mode, Bidirectional-single
path.
Refer to: “Alignment”
Bi-Qlty 2
To print an adjust pattern in quality mode, Bidirectional-
double path.
Refer to: “Alignment”
Bi-Spd 1
To print an adjust pattern in speed mode, Bidirectional-single
path.
Refer to: “Alignment”
Test Print (3/4)
Bi-Spd 2
To print an adjust pattern in speed mode, Bidirectional-
double path.
Refer to: “Alignment”
Test Print (4/4)
Palette
Perform Palette printing
Step 6 :
Printing the selected item.
Step 7 :
Wait until printing is finished and the printer has been returned to the normal status.
