User’s Guide – Osprey 75/102/130
Chapter 3: Basics
54
AP-75102, Rev. 2.0, 28/11/2007
b. When you want to change the type of media
Notes
•
Do not repeat inserting or pulling out the roll media of the same type. Doing so may damage the paper
roll and cause idle operation.
Types
Notes
•
For types and details of roll media refer to: “Options/Supply list”
Replacement procedure
Step 1:
If the printer is switched ON, make
•
There is no printing operation being performed.
•
The control panel is in a normal status.
•
Make sure that the MEDIA SET lamp is lit (orange) on the operation panel.
Step 2:
Press the [F3] key on the operation panel.
The following message appears.
Step 3:
Press the [F3] key and wind up the roll media.
No.
Name
1
Roll media
