User’s Guide – Osprey 75/102/130
Chapter 3: Basics
48
AP-75102, Rev. 2.0, 28/11/2007
Step 10 :
Rewind the roll media a little by pressing the [F1] key on the operation panel WHILE HOLDING the
top-edge of the media BY HAND, in order to eliminate any loose or slant. See image below.
Notes
•
If you do not hold the top edge of the media by hand while rewinding, the roll media will fall out from
the media feed slot to the rear side of the product.
•
Make sure not to set the right edge of the media over the media loading position. If doing so, it may
affect the printing quality.
No. Name
1
Roll media
2
Media loading position
Step 11 :
Check if both sides of the roll media are at least 5 mm away from the pressure roller’s ends. See
image below.
No. Name
1
Roll media
2
Pressure roller
