User’s Guide – Osprey 75/102/130
Chapter 6: Printer menu
118
AP-75102, Rev. 2.0, 28/11/2007
6.5.1.6 Ink Dry menu
Sets the waiting period from the end of the operation to the start of the next printing operation, to dry ink on the
printed media.
Setup items
Parameters
Descriptions
Ink Dry Timer
0 to <30 sec. > to 270
sec. to 60 min.
To change Ink Dry time by operating the following keys.
•
[F2] key: Increases setup value.
•
[F4] key: Decreases setup value.
•
[ENTER] key: To confirm setup value, shifts to the
previous hierarchy menu.
•
[CANCEL] key: To cancel setup value, shifts to the
previous hierarchy menu. User media menu
6.5.1.7 Head Height menu
Sets the distance (head height) between the print head face and the media.
Head height can be changed to different levels according to media thickness.
Setup items
Parameters
Descriptions
<2.5mm>
Set the head height to 2.5 mm. when the media of
normal thickness is used.
3.0mm
Set the head height to 3.0 mm. when the thick media is
used.
3.5mm
Set the head height to 3.5 mm. when the further thick
media is used.
Head height (1/2)
4.0mm
Set the head height to 4.0 mm when the media easily
causing warp is used. Use this height when the head
friction needs to be avoided in preference to the quality
of printing result. This function does not allow good
printing result.
Head height (2/2)
4.5mm
Set this height the head can contact with media in the
4.0 mm setting. Use this height when the head friction
needs to be avoided in preference to the quality of
printing result. This function does not allow good printing
result.
Head height (1/2 to 2/2)
–
After the setting, shifts to the previous hierarchy menu.
