User’s Guide – Osprey 75/102/130
Chapter 5: Preparations before printing
83
AP-75102, Rev. 2.0, 28/11/2007
5.1.7 Installing media retainers
Variations in quality and used conditions could cause the edges of the media to curl, resulting in damage to the
media by the print head surface. To prevent this, use the media retainers to reduce curling of the media.
Use the following procedure to install the media retainers.
Handling the media retainers:
When installing and removing the media retainer, handle it as shown in the figure below.
Mishandling the media retainer could result in bent metal parts that interfere with the print head.
No. Name
1
Media retainer
Installing procedure:
Step 1:
Load the media so that the distance from the edge of the media to the media loading position is at
least 40 mm.
Refer to: “Loading roll media”
No.
Name
1
Roll media
2
Media loading position
