User’s Guide – Osprey 75/102/130
Chapter 6: Printer menu
142
AP-75102, Rev. 2.0, 28/11/2007
6.5.4.4 Media width menu
When media detection is not performed during media initialization, the distance between the media loading
position and the left edge of media (paper width) is set here.
Notes
•
If the set value is larger than the media width set by the media width menu, media and product may be
tainted by ink during printing.
Setup items
Parameters
Descriptions
210mm to <841mm> to
2600mm
To change media width by operating the
following keys.
•
[F2] key: Increases setup value.
•
[F4] key: Decreases setup value.
•
[ENTER] key: To confirm setup value,
shifts to the previous hierarchy menu.
•
[CANCEL] key: To cancel setup value,
shifts to the previous hierarchy menu.
Refer to: “Utility menu”
6.5.4.5 Winding unit menu
Sets Winding unit operation during printing.
Setup items
Parameters
Descriptions
<OFF>
No use of winding unit.
Outside
Sets in outer winding.
Inside
Sets in inner winding.
Take Up Unit
–
After setting, shifts to the previous hierarchy menu.
Refer to: “Utility menu”
