User’s Guide – Osprey 75/102/130
Chapter 3: Basics
50
AP-75102, Rev. 2.0, 28/11/2007
3.2.4 Setting winding unit
Be sure to read and understand the safety warnings before handling the printer.
When using the winding unit, set it up according to the following procedure:
Step 1 :
Attach the media tube between the feed units of the winding unit, the same way you’ve attached
the roll media between the feed units of the unwinding unit at the rear.
Refer to: “Placement of the roll media”
Notes
•
When using the winding unit, always use the media tube attached to the product.
Step 2 :
Pull out the roll media (1) from the feed slot, and fix it with tape to the media tube so that the
leading edge is parallel with the media tube.
No. Name
1
Roll media
2
Media tube
3
Cushioning roller
Notes
•
Install the media on the media tube so that the printing side faces outside. The media cannot be
wound if the printable side faces inside.
