User’s Guide – Osprey 75/102/130
Chapter 6: Printer menu
102
AP-75102, Rev. 2.0, 28/11/2007
6.2 OPERATION PANEL IN STANDBY MODE
This section describes functions operated on the operational panel when the printer is in the normal status.
6.2.1 [F1] – Cancel
When data is being received and you want to cancel this operation, press the [F1] key to cancel the transfer
Step 1 :
Verify the following regarding the condition of the printer.
¾
It is not currently printing
Status of the printer
Operation after the [F1] key is pressed
While printing
Stops printing and deletes data remaining in the printer.
While receiving/
converting
Deletes the data already received and converted, then deletes data from now on.
While waiting for the ink
drying time
Stops waiting for the ink drying time and discharges the media.
6.2.2 [F2] - Operating the pressure rollers
When you want to switch the up and down movement of the pressure rollers follow the steps below.
Step 1 :
Press the [F4] key on the operation panel.
¾
The printer works as follows.
Status of the printer
Operation after the [F4] key has been pressed
The pressure rollers have been lowered
The MEDIA SET lamp switches OFF.
The pressure rollers are lifted
The MEDIA SET lamp will turn on (orange).
The pressure rollers have been raised.
The MEDIA SET lamp switches ON (orange).
The pressure rollers are lowered.
The MEDIA SET lamp will turn off.
