User’s Guide – Osprey 75/102/130
Chapter 5: Preparations before printing
82
AP-75102, Rev. 2.0, 28/11/2007
Step 2:
Push the [F1] key on the operation panel to perform printing by media feed compensation.
Step 3:
When printing with media feed compensation has been finished, push the [CANCEL] key on the
operation panel.
Step 4:
Press the [F2] key of the control panel to change the media feed value.
Step 5:
Push the [F2] key or [F4] key on the operation panel to increase (+) or decrease (-) the media feed
value, using the print result, examples shown below.
No adjustment needed Decrease media feed (-) Increase media feed (+)
Step 6:
Push the [ENTER] key on the operation panel to save the adjusted value.
•
After setting, shift to the previous upper menu.
Step 7:
Repeat Step 2 to Step 7 until a good print result has been obtained.
