User’s Guide – Osprey 75/102/130
Chapter 5: Preparations before printing
85
AP-75102, Rev. 2.0, 28/11/2007
Step 4 :
Press the following keys on the control panel to change the settings :
•
[F1] key: changing the ink colour
•
[F2] key: changing the purge Mode
Notes
•
The factory default settings (initial values) are set as follows.
o
Ink Colour: All
o
Purge mode: Normal
•
Normally, there is no need to change the settings.
•
For details on the settings, refer to "Head cleaning".
Step 5 :
Press the [ENTER] key on the control panel.
•
The settings are confirmed.
•
The unit will start the purge process.
•
Following message appears:
Notes
•
When the [CANCEL] key on the control panel is pressed in the purge menu, the unit will return to
normal status without performing the purge process.
Step 6 :
Wait until the purge process is completed for all print heads and the control panel has returned to
the normal status.
