manualshive.com logo in svg

MR TAPCON 230 AVT, Operating Instructions Manual

Share
Download
MR TAPCON 230 AVT Operating Instructions Manual Download Page 94

9 Operation

Maschinenfabrik Reinhausen GmbH 2021

94

7817454/02 EN

TAPCON

®

 230 Expert

9.1.14.2 Importing data

You can import the following data:

Option

Description

System image

Complete image of the system (software and configura-
tion), with or without history.

Settings

All device settings:

▪ Parameter settings

▪ Event settings

▪ Administrative settings (users, access rights)

The settings can also be imported from another device.

SSL certificate

Import of an SSL certificate with associated key:

▪ Server certificate (.crt + .pem)

▪ Client certificate (.crt + .pem)

▪ Client CA (.crt)

For the import, you will have to compress the certificate
(*.crt) and key (*.pem) in a zip file.

You can import certificates with the following key authenti-
cation:

▪ RSA with 1024 bits

▪ ECDSA with 256 bits ("secp256r1" or "prime256v1"

curve).

TPLE (optional)

Customer program import (TPLE).

Table 27: Importing data

NOTICE

Damage to the file system!

The file system can become damaged due to an incorrect data transmission
process. A damaged file system can lead to the device no longer being
functional.

► Do not disconnect the device from the power supply during the import.

► During the import, do not remove the USB stick or disconnect the network

connection.

1. Go to 

Settings > Import

.

2. Select the desired option for data transmission (PC or USB).

3. Select the file to be imported.

ð

The file is checked.

4. Press the 

Import

 button.

ð

The data is imported, then the device is restarted.

Summary of Contents for TAPCON 230 AVT







































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands