MR TAPCON 230 AVT Operating Instructions Manual Download Page 135

Page: 135 / 166

9 Operation

Maschinenfabrik Reinhausen GmbH 2021

135

7817454/02 EN

TAPCON

230 Expert

9.4.3 Target-tap-position operation

When target-tap-position operation is activated, the device automatically
switches to this target tap position.

1. Go to

Settings > Parameters > On-load tap-changer > Move to the de-

fined target tap position

2. Enter the target tap position.

3. Press the

Accept

button to save the modified parameter.

Target tap position

You can use this parameter to define a target tap position.

9.4.4 Information about the on-load tap-changer

Under "OLTC" you can display information about the on-load tap-changer:

▪ Current tap position

▪ Total tap-change operations (operations counter)

► Go to

Information > On-load tap-changer > OLTC

Summary of Contents for TAPCON 230 AVT







































































































































































Search results

Summary of Contents for TAPCON 230 AVT

Reviews:

Brands by name

Popular brands

MR TAPCON 230 AVT, Operating Instructions Manual

Search results

Summary of Contents for TAPCON 230 AVT

Reviews:

Brands by name

Popular brands