manualshive.com logo in svg

MR TAPCON 230 AVT, Operating Instructions Manual

Share
Download
MR TAPCON 230 AVT Operating Instructions Manual Download Page 30

4 Product description

Maschinenfabrik Reinhausen GmbH 2021

30

7817454/02 EN

TAPCON

®

 230 Expert

5. Select 

Time

.

In these operating instructions, the path for navigating to a parameter is al-
ways shown in an abridged form: Go to 

Settings > Parameters > System >

Time synchronization

.

Setting parameters

There are various ways to configure the settings, depending on the parame-
ter.

Selecting from a list

1. Use 

 to navigate to the list and press 

.

2. Use 

 or 

 to highlight the list entry and press 

.

3. Press the 

Accept

 button to save the modified parameter.

Entering a value

1. Use 

 or 

 to select the value field and press 

.

ð

If operating via the front panel, the numerical keypad appears.

Figure 12: Entering a value

2. Enter the desired value and confirm with 

.

3. Press the 

Accept

 button to save the modified parameter.

Summary of Contents for TAPCON 230 AVT







































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands