![background image](http://html1.mh-extra.com/html/moulinex/cuisine-companion/cuisine-companion_manual_1839947016.webp)
27
EN
26
EN
MANUAL MODE
• The appliance should not be immersed. Never
put the motor unit
(A)
under running water.
Once you have finished using it, disconnect the
appliance.
• Clean the bowl immediately after use.
• Press the locks
(D2)
then lift the bowl
assembly
(D)
.
• Place the bowl on a flat surface.
• Unlock the lid by rotating one quarter of a turn
clockwise. Carefully remove the lid.
• When the parts have cooled, unclip the seal
holder from the lid with help of the spatula
(G)
(See Fig. 15)
.
•
Take care with the knives of the ultrablade
chopping blade (F1) and the kneading /
crushing knife (F4) when you are cleaning
them and when you empty the bowl, they are
extremely sharp.
• When the parts have cooled down:
- dismantle the common spindle
(D3)
, the seal
(D4)
and the locking ring
(D5) (See Fig. 13)
.
- clean the bowl
(D)
, the common spindle
(D3)
, the seal
(D4)
, the locking ring
(D5)
,
the accessories
(F1), (F2), (F3), (F4), (F5)
,
the steam regulator cap
(E1)
, the lid
(E2)
,
the seal holder
(E3)
and the seal
(E4)
using
a sponge and some soapy water.
• Rinse these different parts under running water.
• For baked-on food, let the bowl soak for several
hours in water and dishwashing detergent and
scrape, if necessary, with a spatula
(G)
or with
the abrasive side of a sponge.
• If there is a build up of limescale in the bowl,
use a damp sponge and, if necessary, white
vinegar.
• To clean the motor unit
(A)
, use a damp cloth.
Dry carefully.
• To help you with cleaning, the bowl, lid
assembly and accessories are dishwasher safe,
with the exception of the common spindle
(D3)
and its locking ring
(D5) (See Fig. 14)
.
• The accessories, the detachable common
spindle and the parts of the lid may become
slightly discoloured with certain ingredients
such as curry, carrot juice, etc; this does not
represent any danger for your health or for the
operation of your appliance. To avoid this, clean
these parts immediately after use.
CLEANING YOUR APPLIANCE
Steam cooking time
Ingredients
Quantities (max)
Estimated cooking times
Potatoes
1 kg
30 min
Carrots
1 kg
30 min
Courgettes
800 g
20 min
Parsnips
800 g
25 min
Leeks
800 g
25 min
Green beans
800 g
30 min
Broccoli
500 g
20 min
Fish
600 g (with baking parchment)
15 min
White meat
600 g (with baking parchment)
20 min
You can also use the manual mode by selecting a temperature of 130°C and the cooking time according
to the quantity and type of ingredients: see table below.
Some recipes may cause unexpected overflow due to the appearance of bubbles, particularly
when using frozen vegetables. In this case, you should reduce the volumes accordingly.
Your appliance is equip-
ped, as standard, with
electronic motor protec-
tion to guarantee its lon-
gevity. This electronic
security
safeguards
against incorrect use; in
this way, the motor is properly protected.
In cases of extreme use which disregard the re-
commendations in the instructions (see para-
graph ‘FIRST USE’: potentially excessively large
quantities and/or abnormally long use and/or
preparing different recipes at short intervals), the
electronic protection will be triggered to preserve
the motor; in this case, the appliance will stop
functioning and the message ‘SECU’ will be dis-
played on the LCD screen of the control panel to
indicate that the appliance is temporarily out of
service.
If ‘SECU’ is displayed on the control panel and
your appliance stops working, proceed accor-
dingly:
• Leave your appliance plugged in, do not press
the ‘0/1’ switch.
• Please refer to the recommendations in the ins-
tructions and readapt your use of the appliance
(see paragraph ‘FIRST USE’: amount of ingre-
dients/recipe preparation time/temperature/type
of accessories).
• Allow the motor to cool down for half an hour.
• Restart the appliance by clicking on the ‘Start
/Stop/Reset’ button for two seconds (see B7 in
the instructions).
Your appliance is now ready to be used again.
For further information, customer service depart-
ment is at your disposal (see details in the gua-
rantee booklet).
IMPORTANT - ‘MAKING YOUR APPLIANCE SECURE’ INSTRUCTIONS ( ‘SECU’ )
1- Press directly on the selector
representing the parameter
you have chosen to adjust,
i.e. the speed selector
(B2)
or the cooking temperature
selector
(B3)
or the time
selector
(B4)
, the chosen parameter flashes on
the screen
(C1- C2-C3)
.
2- Then adjust the setting(s)
using the +/- selector
(B6)
.
For safety reasons, it is not
possible to set a temperature
without setting a cooking
time.
3- When you have finished
entering all your parameters,
press the
“start”
button
(B7)
. When your appliance is
using cooking mode, the red
indicator light
(B3)
lights up
to inform you that cooking has started. When the
programme has started, you have the possibility
of stopping the appliance at any time by pressing
the
“stop”
button.
The programme is then in pause mode and you
have the possibility of restarting by pressing
“start”
again. If you have chosen the wrong
programme and if you want to cancel it, press and
hold the
"stop"
button for 2 seconds.
4- When the programme has ended, the appliance
emits 3 beeps.
5- Press the locks
(D2)
and then remove the bowl
assembly
(D) (See Fig. 12)
.
Turbo / Pulse functions
1- Use the control panel
(B)
to directly access
the “turbo” and “pulse” functions
(B5)
. To use
in turbo mode (maximum speed in direct
access), simply press and hold the “turbo”
selector. The LCD screen then displays the time
in use
(C3)
to help you. To use the pulse
(intermittent operation), activate and stop the
function by simply pressing the
“pulse”
selector. Here too, the LCD screen helps you by
indicating the time in use. When the function
has started up, you have the possibility of
stopping the appliance at any time by pressing
the
“stop”
button. The function is then in
pause mode, you have the possibility of
restarting by pressing the
"start”
button
again.