23
EN
22
EN
YOUR APPLIANCE HAS 2 OPERATING MODES:
•
Automatic programme mode:
Speed, cooking temperature and duration are
pre-programmed to make sauces, soups, stews,
steamed
dishes,
pastry
and
desserts
automatically.
•
Manual mode:
Customised adjustments of speed parameters,
cooking temperature and duration for use at
your convenience.
INSTALLING THE BOWL, ITS ACCESSORIES AND
THE LID ASSEMBLY
• Before using for the first time, wash all items
(D, E, F, G)
in warm soapy water, but not the
motor unit
(A)
. Your bowl
(D)
is fitted with a
detachable spindle
(D3)
to facilitate cleaning.
• Ensure that all packaging has been removed
before use, particularly the protection located
between the bowl
(D)
and the motor unit
(A)
.
• Place the seal
(E4)
on the seal holder
(E3)
(See Fig. 1)
, clip the assembly to the lid
(E2)
(See Fig 2)
.
• Position the seal
(D4)
on the common spindle
(D3)
. Lock the assembly onto the base of the
bowl with the locking ring
(D5) (See Fig. 3)
.
• Position the chosen accessory in the bowl:
- the accessories
(F1, F2, F3, or F4)
to
on the common spindle at the bottom of
the bowl
(See Fig. 4.1)
,
- the steam basket inside the bowl
(F5)
,
(See Fig. 4.3 )
, having taken care
beforehand to fill the 0.7l tank with liquid
preparation (water, sauce…)
(See Fig. 4.2)
.
• Incorporate the ingredients into the bowl or
steam basket.
• Position the lid on the bowl
(D)
lining up the
two triangles
(See Fig. 5)
, lock the lid without
pressing by turning it clockwise
(See Fig. 6)
.
• Position the steam regulator cap
(E1)
on the
lid; two positions are possible: low steam
(a)
or high steam
(b)
.
For example: for steam cooking, adjust the cap,
with the low steam part
(a)
facing towards you
(this allows the maximum amount of steam to be
dispersed into the bowl).
Position the bowl
(D)
on the motor unit
(A)
until
you hear a “click”
(See Fig. 8)
.
• The appliance only starts up if the bowl and the
lid are correctly positioned and locked on the
motor unit.
USING THE CONTROL PANEL (B)
Selecting an automatic programme:
Sauces
Steam cooking
Soups
(to Read programme
P1 Smooth soup / P2 Soup with
small pieces.)
Pastry
(in programme
P1
bread /
P2
brioche /
P3
cake)
Stews
(in programme
P1
vegetable
casserole /
P2
stew /
P3
risotto)
Desserts
In the event of incorrect positioning or
incorrect locking of either (See Fig. 10.1
and 10.2), the logo starts to flash when
a function is activated.
Selecting custom settings:
Selecting the motor speed.
2 intermittent speeds and 10
continuous progressive speeds.
Selecting cooking speed.
From 30° to 130°C.
Heating indicator light: it lights up
when cooking starts and switches
off when the temperature inside
the bowl falls to below 50°C.
Selecting operating time.
From 5 sec to 2 hours.
Selecting the
turbo
functions
(maximum speed in direct access)
and
pulse
(intermittent operation)
without using other settings.
Increase speed, cooking
temperature and duration.
Decrease speed, cooking
temperature and duration.
This button has
3 functions:
-
“Validation”
of the
choice of your automatic
programme
or
your
parameters chosen in
the context of manual
use (speed, cooking
temperature, time).
-
“Pause”
during use,
once the appliance has
been started up.
-
“Reset”
of
the
parameters selected on
the
appliance
by
pressing for 2 seconds.
Tips for use:
Your appliance is fitted with a microprocessor that controls and analyses its stability. In the event
of instability, the motor rotation speed will be automatically reduced, if this instability continues,
the motor will be stopped and "STOP” will be displayed on the screen.
• Check that the quantity of ingredients is not too large and that the speed used is the correct
one.
• Check that you are using the recommended accessory.
• Then restart your appliance normally.
