MOTO GUZZI V 11 SPORT, Workshop Manual

Page: 32 / 412

A
B
C
D
E
F
G
H
I
L
M
N
O
P
12 M
ODEL
F
EATURES
4 TIGHTENING TORQUES
Nm DESCRIPTION
Nut and stud bolt for head-cylinder tie-rods
Fastening screws for rocker pins
Spark plugs
Hollow screws fastening the oil delivery piping to the heads (ø8x1,25)
Nut fastening the gearing to the camshaft
Intake pipe fastening screws
Fastening screws for connecting rod caps(ø10x1)
Screws fastening the flywheel to the crankshaft(ø8x1,25) - using medium strength Loctite
Flywheel crown fastening screws(ø6x1)
Crankshaft pinion locking nut(ø25x1,5)
Alternator locking nut(ø16x1,5)
Front and rear brake calipers draining union
Oil filler cap in the gearbox and transmission housing
Clutch draining union
Nut locking the bearing onto the tapered pinion
Screws fastening the crown to the drilled pin
Fastening screw for side stand support plate
Front wheel spindle
Rear wheel spindle screw (housing side)
Fastening screws for front and rear brake disks(ø8x1,25)
Ring nut for gearbox main shaft, universal joint side
Ring nuts for gearbox secondary shafts
Ring nut for gearbox main shaft, clutch side
Head temperature sensor casing (using Loctite 601)
Head temperature sensor
Hollow screw fastening the clutch piping and front brake to the pump
Radiator oil piping unions
STANDARD VALUES
Screws and nuts ø 4
Screws and nuts ø 5x0,8
Screws and nuts ø 6x1
Screws and nuts ø 8x1,25
Screws and nuts ø 10x1,5
Other tightening torques are indicated on the drawings for the suspension assemblies, front and rear wheel.
45÷50
25÷30
8÷12
6÷7
3÷3,5
25÷30
20
10÷12
100
80
90
28÷30
120
90÷100
70÷75
40÷42
180÷200
8÷12
7÷10
80
110÷120
15÷17
40÷42
61÷66
20
150
15÷18
20÷30
6÷8
40÷42
30
10÷12