82
conoscenza della reale composizione e dei pericoli del fluido trattato.
Nel trasporto di determinati materiali dove vi è la presenza di sostanze nocive l’operatore che dovesse accedere,
nel corso di interventi ordinari o straordinari, pulizia, altro, deve indossare gli idonei dispositivi di protezione
come indicato dalla cartellonistica ivi presente e nelle procedure indicate nel manuale d’uso.
There are not mechanical problems. The fan is protected mechanically by fixed or mobile guards. The material
inlet and outlet mouths are protected by the installer or a grid which prevents to reach moving parts or another
system or nets installed by
Moro S.r.l.
.
In any case for the maintenance activities, and after having put the machine in safety conditions, the operator must use
some individual protection devices, such devices must always be used for any operation carried out on the fan:
It is forbidden to stop the fan before the internal fluid has not reached a temperature lower than 60°C, in order
that the excessive heat does not damage the motor or the single-block. If this temperature cannot be guaranteed,
systems of external cooling should be arranged.
When the fan is not used, if the internal temperature increases, the user should bring it, by himself, to values
lower than 60°C before starting.
The manufacturer of the system or the user will put special warning plates, in the different parts of the machine
indicating the possible presence of:
- emissions of dangerous gases;
- high temperature surfaces;
- other dangerous conditions.
During maintenance or cleaning interventions the operator must wear proper protections of the respiratory tract or face.
In special cases even proper clothes.
Proper warning plates in parts of the machine indicate that the operator must use individual protection
devices:
•
Dangers caused by noise
A noise measurement was carried out on the fan at idling.
As indicated in the manual the user must carry out proper measurements with the scroll working with the material.
The user and the employer must follow the law standards regarding the protection against the daily personal exposure
of the operators to noise (as by European and national standards) with possible use prescription of individual protection
devices (headphones, etc.) according to the total sound pressure level present in the work area and the personal
daily exposure level of the personnel.
• Dangers caused by high temperatures
In case of failure or maintenance and cleaning interventions, the operator can enter in contact with surfaces at
high temperature with stop machine. The problem of high temperature, if existing, is caused by the processing material
transported: in this case the operator should wait that the internal temperature decreases before opening the fan.
Proper warning plates, placed in strategic points indicate the danger due to the presence of high-temperature
surface and that the operator must use individual protection devices, in particular protective gloves.
• Dangers caused by inhalation of dusts and vapours/gases
È OBBLIGATORIO
USARE LA
MASCHERA
È OBBLIGATORIO
USARE I GUANTI
ATTENZIONE
SOSTANZE
NOCIVE
È OBBLIGATORIO
USARE LE
CALZATURE
DI SICUREZZA
È OBBLIGATORIO
USARE I GUANTI
See the manual for further information
Use devices protecting the
respiratory tract
È OBBLIGATORIO
USARE LA
MASCHERA
ATTENZIONE
TEMPERATURE
PERICOLOSE
È OBBLIGATORIO
USARE LA
MASCHERA
Summary of Contents for ES 1
Page 112: ...110 ...