Mitsubishi Electric F930GOT-BWD-E, User Manual

Page: 189 / 274

Graphic Operation Terminal F930GOT Changeover of Display Screen (FX-PCS-DU/WIN-E) 10
10-7
Example of screen changeover using touch keys
• Examples of screen changeover using touch keys are shown below. Set the "Change
Screen" object for all screens (common setting) and for individual screen.
- Common setting for all screens
In this example, the screen No. 0 is displayed from any screen when the MENU key is
pressed.
Characters "MENU" are displayed by the "Text" object.
- Setting for individual screen
•Screen No. 0 is created, and screen changeover is set
as follows.
Screen No. 0 is a menu screen.
When either of the ST. 1 to ST. 3 keys is pressed, a
corresponding screen is displayed.
•Characters "ST. 1" to "ST. 3" are displayed by the "Text"
object.
•Screen changeover for screen No. 1 is set as follows.
• When the "
▼
" key is pressed, screen No. 6 is displayed without regard to the ON/OFF sta-
tus of bit devices in the PLC.
• When the MENU key is pressed, screen No. 0 is displayed in accordance with the setting of
the "Change Screen" object set for all screens.
Condition
Screen
No.
(Direct)
Save Current
Screen
Control
Input
Bit Device
1
Touch key
No. 50
Not specified 0 Not effective
Condition
Screen
No.
(Direct)
Save Current
Screen
Control
Input
Bit Device
1
Touch key
No. 0
Not specified 1 Not effective
2
Touch key
No. 1
Not specified 2 Not effective
3
Touch key
No. 2
Not specified 3 Not effective
Condition
Screen
No.
(Direct)
Save Current
Screen
Control
Input
Bit Device
1
Touch key
No. 0
Not specified 1 Not effective
For screen changeover by
screen No. stored in memory,
refer to Paragraph 11.5.
ST. 1
To screen
No. 2
* SETTING MENU *
Screen No. 1
* STATION 1 (1/2) *
MENU NEXT
Screen No. 1 : Menu screen
To screen
No.6
To screen
No.1
NEXT
100
NUMBER OF TARGETS
Touch
key
No.0
No.1
No.2
To screen
No. 3
To screen
No.4
ST. 1
ST. 2
ST. 3
NUMBER OF MANUFACTURE
PROCESSING TIME
SCREW TIGHTENING NUMBER
ST. 2 ST. 3
MENU NEXT