Mitsubishi Electric F930GOT-BWD-E, User Manual

Page: 226 / 274

Graphic Operation Terminal F930GOT Creation of Display Screen (SW
o o o o
D5C-GOTRE-PACK) 11
11-26
3) Text
Enter a text to be displayed inside the touch key.
Up to 20 full-width characters or 40 half-width characters can be displayed.
4) Operation setting
Bit device : When the touch key is pressed, a specified bit device is turned on or off.
(Paragraph 11.5.2)
Word device: When the touch key is pressed, the current value of a specified word device
can be changed. (Paragraph 11.5.3)
Base screen: When the touch key is pressed, the display screen is changed over.
(Section 12)
5) Simultaneous press
Set whether or not the touch key is effective when it is pressed simultaneously together with
another touch key.
Only two keys can be made effective when pressed simultaneously.
Three or more keys cannot be made effective when pressed simultaneously.
6) Trigger
Always : The touch key always offers the assigned functions.
ON : While a specified bit device is ON, the touch key offers the assigned functions.
OFF : While a specified bit device is OFF, the touch key offers the assigned functions.
ƒA•[ƒ•
•ã•¸
ƒA•[ƒ•
abc
ABC
abc
ƒA•[ƒ•
•ã•¸
ABC
ƒA•[ƒ•
•ã•¸
abc
ABC
123
ƒA•[ƒ•
•ã•¸
abc
123
When the second line is
blank and texts are
displayed in the first and
third lines respectively
When the first and
third lines are blank
and a text is
displayed in the
second line When a text is
located in the center
<Display example:>
-In the case of 1 line -In the case of 2 lines -In the case of 3 lines
ƒA•[ƒ•
When a text is displayed in 1 line
abcdABCD1234
If a text is longer than the touch key, the text is extruded.