Mitsubishi Electric F930GOT-BWD-E, User Manual

Page: 232 / 274

Graphic Operation Terminal F930GOT Creation of Display Screen (SW
o o o o
D5C-GOTRE-PACK) 11
11-32
3) Shift
• When the number of digits of a numeric to be displayed is smaller than the specified total
number of digits, the numeric is automatically shifted to the right, the center or the left in
accordance with the setting.
Example:
When the specified total number of digits is set to 9 and the displayed numeric is a 3-digit
value
4) Gain 1, gain 2 and offset
The value obtained by the calculation "(Monitor value x Gain 1 / Gain 2) + Offset" is dis-
played.
Example:
When the monitor value is 1000 (current value of D100), the gain 1 is set to 10, the gain 2 is
set to 2 and the offset is set to 3
(1000
×
10
÷
2) + 3
à
"5003" is displayed.
5) User ID (Refer to Paragraph 3.3.)
An ID can be assigned to the numerical input function.
When a device data specified by the "Numerical Input" object is changed (by pressing of the
ENT key), the ID No. is stored in the write device "DO+3" in the system information. By
checking this ID No., the changed "Numerical Input" object can be detected.
Make sure to assign an ID different from IDs for other numerical inputs.
Destination ID
This attribute allows to specify the change order of "Numerical Input" objects.
1 2 3
1 2 3
1 2 3
Start point
Right
Center
Left
:
:
: