Mitsubishi Electric F930GOT-BWD-E, User Manual

Page: 103 / 274

Graphic Operation Terminal F930GOT Creation of Display Screens 8
8-13
8.4.4 Attribute of display element
The display elements shown in Paragraph 8.1.2 are equipped with detailed set items
(attributes).
Representative attributes are explained below.
Display position:
Specify the X and Y coordinates of the display position.
Because the mouse is used for the screen creation software, coordinates specified by the
mouse are registered.
Character size:
Half-width character: 8
×
16 dots
Full width character: 16
×
16 dots
1/4-width character: 8
×
8 dots
×
0.5 to
×
4 of full-width size in the lateral and longitudinal directions: Available only in alphabets,
numerics characters
Color specification:
Color: White, black, red, blue, yellow, green, purple and light blue
Black-and-white: Black and white
- FX-PCS-DU/WIN-E: Display color, background color, needle color and frame color
- SW
¨
D5C-GOTRE-PACK: Character color, plate color and frame color
Screen background color:
FX-PCS-DU/WIN-E: Eight colors or two colors (black and white) can be specified.
SW
¨
D5C-GOTRE-PACK: Only black can be specified.
Device specification (specification of devices in the PLC):
- Word device:
Timer (T), counter (C), data register (D) and index register (V and Z) In the A Series, link
register (W) and file register (R) are also available.
- Bit device:
Input (X), output (Y), auxiliary relay (M), state (S), timer (T) and counter (C)
In the A Series, F and B are also available.
Upper/lower limit:
Set the upper limit (maximum value) and the lower limit (minimum value) of displayed word
devices.
Word devices are displayed within the range determined by the upper and lower limits.
A
A
A
A
A
A
8 dots
8 dots
1/4-width
Half-
width
Full-
width
×
2
(in both lateral
and longitudinal
directions)
×
3
(in both lateral
and longitudinal
directions)
×
4
(in both lateral and
longitudinal directions)