Mitsubishi Electric F930GOT-BWD-E, User Manual

Page: 228 / 274

Graphic Operation Terminal F930GOT Creation of Display Screen (SW
o o o o
D5C-GOTRE-PACK) 11
11-28
Operation examples of "Bit SET" and "Bit RST"
When the SET key is pressed, Y1 is set. When the RST key is pressed, the Y1 is reset.
- SwitchControl input: SET key, RST key
Controlled bit device: Y1 (set), Y1 (reset)
n n n n
Important point
1) Controlled bit device
If "Operation" is set to "Momentary", the controlled bit device becomes OFF when the dis-
play screen is changed over.
2) If two or more keys are pressed simultaneously
If two or more switch functions are registered, and two keys are pressed, both functions will
be executed.
If three or more keys are pressed simultaneously, only the first two pressed will be effective.
3) If objects are assigned to one touch key
If two or more switch functions are assigned or another object is assigned to one touch key,
the priority is given to a function/object registered earlier (while the screen is created).
4) If screens are overlaid
If screens are overlaid using control devices or the screen call function, the switch functions
are effective on all of the base screen and overlaying screens. If switches are overlaid, the
switch on the top screen is effective. Pay rigid attention so that switches do not are not over-
laid.
In the switch areas A and B on the composed screen realized by overlay, each switch is
effective. However, if the area C is pressed, the switch B located on the top is effective.
ON
OFF
ON
OFF
ON
OFF
Y1
RST key (reset)
SET key (set)
A
B B
A
Base screen Overlaying screen Overlaying screen
C
Example