2
Safety information
2.1
General information
CAUTION
Warning of personal injury.
This device has been built and tested in compliance with the safety regulations for
measuring and control equipment for protection class I (protective grounding
conductor) according to IEC 1010/EN 61010 or VDE 0411.
The product was in perfect condition with regard to safety features when it left the
factory.
To maintain this condition and to ensure safe operation, the user must follow the
instructions and observe the warnings in this manual.
2.2
Intended use
The instrument is intended for use as an indicator for weighing functions.
Product operation, commissioning and maintenance must be performed by trained and
qualified personnel who are aware of and able to deal with the related hazards and take
suitable measures for self-protection.
The device reflects the state of the art.
The manufacturer does not accept any liability for damage caused by third-party system
components or due to incorrect use of the product. The use of this product signifies
recognition of the stipulations listed above.
2.3
Incoming goods inspection
Check the contents of the consignment for completeness. Check the contents visually to
determine whether any damage has occurred during transport. If there are grounds for
rejection of the goods, a claim must be filed with the carrier immediately. A Minebea Intec
sales or service organization must also be notified.
2.4
Before operational startup
NOTICE
Perform visual inspection!
Before operational startup as well as after storage or transport, inspect the device
visually for signs of mechanical damage.
2.4.1
Installation
The device has to be installed in an EMC-compliant manner, see Chapter
.
The housing of the device complies with IP66.
Mount the instrument with the cable entry glands pointing downwards.
To ensure proper cooling of the instrument, make sure air circulation around the
instrument is not blocked. Avoid exposing the instrument to excessive heat, e.g., from
Transmitter in field housing PR 5230
2 Safety information
Minebea Intec
EN-10