— Printer
Printer
Selection: <none>, built-in RS232, built-in
RS-485
— Param
Selection: Assigned to, protocol, Baudrate, Bits,
Parity, Stopbits, Output mode
— Config
See Menu [Printing parameter].
— Remote display
Remote display
Selection: <none>, built-in RS232, built-in
RS-485
— Param
Selection: Assigned to, Baudrate, Bits, Parity,
Stopbits, Mode
— ModBus RTU
Selection: <none>, built-in RS232, built-in
RS-485
— Param
Selection: Assigned to, Baudrate, Bits, Parity,
Stop bits, Slave-ID
— SMA
Selection: <none>, built-in RS232, built-in
RS-485
— Param
Selection: Assigned to, Baudrate, Bits, Parity,
Stopbits
— xBPI-Port
Selection: <none>, built-in RS232, built-in
RS-485
— Param
Selection: Assigned to, Baudrate, Bits, Parity,
Stopbits
— EW-Com
Selection: <none>, built-in RS-485
— Param
Selection: Assigned to, Baudrate, Bits, Parity,
Stopbits, Slave-ID
— Date
Date
Input: yyyy, mm, dd
— Time
Time
Input: hh, mm, ss
— Application
Selection: Standard, EasyFill
— Address
Device address, e.g. for the printout
Input: A
Z
— PIN
Access code, to protect the system setup from
unauthorized operation.
Input: 6 numerical characters
— Sequence number
Automatic counter for print jobs
— SetTareKey
Tare key
Selection: Tare&reset tare, tare&tare again,
disabled
— SetZeroKey
Zero-setting key
Selection: only when not tared, reset tare on
zeroset, disabled.
7.11.1
Serial ports parameter
7.11.2
Date & time
7.11.3
Operating parameter
7 Commissioning
Transmitter in field housing PR 5230
EN-115
Minebea Intec
