Mindray SynoVent E5, Operator'S Manual

Page: 37 / 196

3-9
3. Adjust the support arm.

Support arm joint E or G: To adjust the bending angle of the support arm
downward, push and hold the blue button on support arm joint E or G with
one hand and hold the support bar and press it downward with the other hand.
Support arm joint E or G can be adjusted for up to 130
° . To adjust the bending
angle of the support arm upward, only lift the support bar to the desired position
with no need to push the blue button .

Support arm joint F: pull support arm joint F upward or downward to the desired
position.
 Hold the bottom of support arm or the suport bar beside support arm joint G and
push it leftward or rightward with force to rotate the support arm to the desired
position.
4. Place the breathing hoses onto the hose hook.
NOTE

Operate support arm joint E or G with both hands as shown below. Operate with
only one hand will bring some risk.