Mindray SynoVent E5, Operator'S Manual

Page: 71 / 196

6-3
System check items include:
 O2 flow sensor test: test the O2 inspiratory valve and O2 flow sensor;
 Air flow sensor test: test the Air inspiratory valve and Air flow sensor;
 Expiratory flow sensor test;
 Pressure sensor test: test the pressure sensors at the inspiratory and expiratory ports;
 Expiration valve test;
 Safety valve test;
 O2 sensor test;
 Leakage (mL/min);
 Compliance (mL/cmH2O);
 Circuit resistance (cmH2O/L/s).
System check result can be:
 Pass: indicates that check of this item is completed and is passed;
 Fail: indicates that check of this item is completed but is failed;
 Cancel: indicates that check of this item is cancelled;
 No Gas Supply: indicates that O2 or Air supply is not connected when O2 sensor test,
O2 or Air flow sensor test is being carried out;
 Monitoring Off: indicates that the sensor monitoring function may not be turned on
when O2 sensor test is being carried out.
When system check is being performed, the system prompts [
Running ] on the right side of
the current check item. In this case, if you select [ Skip ], the system stops check of this item
immediately and displays [ Cancel ]. Check of the next item begins at the same time. If you
select [ Stop ], the system stops check of the current item and also check of the remaining
items, and displays [ Cancel ].
When checks of all items are completed, if you select [ Retry ], the system starts a new round
of check. When [ Exit ] is selected, the system exits check and enters standby screen.
6.5 Select Patient
After system check is completed, select [ Exit ] and then select a patient. If [ Same Patient ] is
selected, select [ Vent Type ] in the accessed menu and select [ Ok ]. If [ New Patient ] is
selected, set [ Patient Type ], [ IBW ], and [ Vent Type ] in the accessed menu, and select [ Ok ].