MIMAKI JV400-130SUV Operation Manual Download Page 28

Page: 28 / 194

1-16

(2)

Peel the seal of double coated tape.

Firmly fix the ink pack on the eco case with
double coated tape so that it may not move.

• Fix the ink pack after pulling it so that the ink pack may not

go slack.

Attach the cover.

• Hang the claw on the IC ship side and then insert the cover

into the case.

Attach the IC chip.

• Attach the IC chip as indicated in the photo.
• Attach it so that there is no gap in the part indicated with an

arrow.

Bad example of attaching IC chip

• Fix the ink pack so that it may not be biased in the eco case.

Good example

The corner of the case

matches the ink pack

corner.

The ink pack has

gone too far

downward.

The ink pack goes slack in

spots.

Bad example

No gap shall be found.

There is a gap.

The ins and the outs is

reverse.

The back and the forth is

reverse.

Summary of Contents for JV400-130SUV



































































































































































































Search results

Summary of Contents for JV400-130SUV

Reviews:

Related manuals for JV400-130SUV

Brands by name

Popular brands

MIMAKI JV400-130SUV, Operation Manual

Search results

Summary of Contents for JV400-130SUV

Reviews:

Related manuals for JV400-130SUV

Brands by name

Popular brands