MIMAKI JV400-130SUV, Operation Manual

Page: 135 / 194

Replacing consumables
4-35
1
1
1
4
Routine Maintenance
If a Waste Ink Tank Confirmation Message Appears
Ink used in head cleaning, etc. is stored in the waste ink tank on the lower right side of the machine.This
machine counts the accumulated amount of discharged ink. When that reaches a specified amount, the
machine displays a confirmation message.(When this message is displayed, consider the replacement of the
waste ink tank.)
Confirmation Message in LOCAL
1
The message on the right is displayed.
2
Check the state of the waste ink tank
• When it is different from the actual amount, press and
correct.
• When you correct (80%), press the key to return to LOCAL.
• When you replace (disposal) and clear the count, perform the procedures in “Replace the waste ink tank
with another”. ( P.4-36)
• The message “Check waste ink” is displayed when it reaches 80% (1.6L ) of the 2L tank.
• With firmware var.3.50 or later, the message “WASTE INK FULL” appears when the tank reaches
100% (2.0L).
< LOCA L >
C h e c k w a s t e i n k [ MNT ]
< LOCA L >
WAS TW I NK FU L L [ MNT ]
C o n f i r m a w a s t e t a n k
L e v e l : 8 0%( 1 . 6 L )