MIMAKI JV400-130SUV Operation Manual Download Page 17

Page: 17 / 194

Names of Parts and Functions

1-5

Before Use

Rear Side and Right Side of the Machine

Pre-heater

Preheats the media before printing.
(Located inside the platen)

Cleaning solution cartridge

Set a dedicated Washings
cartridge (optional:
FL007-Z-22).

Roll holders

Putting this into the paper core
(right and left) of a narrow roll
medium (less than 1.6m), hold the
medium. It supports the paper

USB 2.0 connector

This is USB2.0 interface connector.

Clamp lever (rear)

Interlocks with the clamp lever in the
font of this machine.

LAN connector

Please use this connector when you use event
mail function.

Main power switch

Turns on/off the main power for this machine.
Leave the main power turned on to prevent ink
clogging.

AC inlet

Connect the power cable to the AC inlet.

Summary of Contents for JV400-130SUV



































































































































































































Search results

Summary of Contents for JV400-130SUV

Reviews:

Related manuals for JV400-130SUV

Brands by name

Popular brands

MIMAKI JV400-130SUV, Operation Manual

Search results

Summary of Contents for JV400-130SUV

Reviews:

Related manuals for JV400-130SUV

Brands by name

Popular brands