MIMAKI JV400-130SUV, Operation Manual

Page: 123 / 194

4-23
1
1
1
4
Routine Maintenance
When Nozzle Clogging Cannot Be Solved
When nozzle clogging cannot be solved even after the head cleaning ( P.2-19) has been done, perform the
following two functions:
Washing of Head nozzle
Perform cleaning of the nozzles in the heads to prevent them being clogged with coagulated ink.
1
Press the key in LOCAL.
2
Press to select [NOZZLE WASH].
3
Press the key.
• The carriage moves to the maintenance position.
4
Clean the wiper and the bracket.
(1) Open the right maintenance cover then pull out it by holding projections at both ends of the
wiper.
(2) Clean the wiper and bracket with a clean stick dipped in cleaning solution for maintenance.
(ML007-Z-K1) Wipe off so that cleaning solution for maintenance will not remain.
(3) Insert it in the original position by holding the projections at both ends of the wiper.
NOZZLE WASH
• Wash the head nozzle. ( P.4-23)
NOZZLE RECOVERY
• Alternative nozzles for printing, when nozzles missing can not be improved.
( P.4-28)
Check the items on the
right beforehand.
Is [NEAR END] or [INK END] displayed?
• The cleaning solution or ink is absorbed when the nozzles are washed.
At this time, if the state of "no ink" or "almost no ink" is detected, the nozzle
washing operation cannot start.
• Replace the cartridge with another from which the state of "almost no ink" or "no
ink" is not detected.
• Until wiper cleaning is competed, [COMPLETED (NEXT): ENT] is displayed on the screen. After
the work up to the step 4 is completed, press the key. If you press the key
before cleaning is completed, the machine moves to the next washing procedure.
CARR I AGE OUT
[ ENT ]
MAINT.
NOZ Z L E WASH
[ ENT ]
WI PER C L EAN I NG
COMP L E T ED ( NEX T ) [ ENT ]
Projection