MIMAKI JV400-130SUV, Operation Manual

Page: 72 / 194

3-14
Setting the Display of Media Residual
Whether the screen displays the remaining amount of a media is set.
1
Press the key in LOCAL.
2
Press to select [MACHINE SETUP].
3
Press the key.
4
Press to select [MEDIA REMAIN].
5
Press the key.
6
Press to select ON/OFF.
7
Press the key.
• If you selected “A” in step 6: proceed to step 8 and input the remaining amount of media.
• If you selected “A” in step 6: proceed to step 9.
8
Press to input the media remain.
• Set Value : 0.0 to 500.0 min
When the media remaining amount
display is turned to "ON"
the remaining amount of a media is displayed in Remote.
When the media remaining amount
display is turned to "OFF"
the remaining amount of a media is not displayed in the Remote.
• The amount of a media that has been fed by the printing and jog keys is reflected in the remaining
amount of a media.
• The length of a media (initial value of the remaining amount) is entered when a roll media is
detected.( P.2-12)
The following procedure depends on the firmware version of your device.
• If you are using A or earlier,
 you cannot input the remaining amount of media by selecting A in step 6.
Proceed to step 9.
• If you are using A or later,

proceed to step 8 if you selected “A” in step 6, and input the remaining amount of
media.
FUNCT I ON
SE TUP
[ ENT ]
FUNCT I ON
MACH I NE SE TUP [ ENT ]
MACH I NE SE TUP
AUTO P o w e r - o f f [ ENT ]
MACH I NE SE TUP
MED I A REMA I N
[ ENT ]
MED I A REMA I N
: OF F
MED I A REMA I N
: ON
I NPUT MED I A L ENGTH
= 5 0 . 0m