MIMAKI JV400-130SUV Operation Manual Download Page 96

Page: 96 / 194

3-38

Convenient use

Confirming Machine Information

The information of this machine can be confirmed.
The following items can be confirmed as machine information.

Displaying the Information

Press the

key in LOCAL.

Press

to select [INFORMATION].

Press the

key.

Press

to select [USAGE].

Item

Description

ERROR HISTORY

*1. Supported from the firmware ver.2.60

This displays the history of errors and warnings to date.

When you press , the date of occurrence (year/

month/day/hour/minute) and the error/warning information
are displayed alternately in the order of occurrence.

USAGE

WIPING

The information of this machine can be confirmed.

WASTE INK TANK
PRINT LENGTH
PRINT AREA
USE TIME
UV LAMP

VERSION

This displays the firmware version of the machine.

LIST

This allows you to print the settings of the machine.

Ink REPL. Report

This prints ink history of this machine.

FUNCT I ON
SE TUP

[ ENT ]

FUNCT I ON

I NFORMA T I ON

[ ENT ]

I NFORMA T I ON

USAGE

[ ENT ]

Summary of Contents for JV400-130SUV



































































































































































































Search results

Summary of Contents for JV400-130SUV

Reviews:

Related manuals for JV400-130SUV

Brands by name

Popular brands

MIMAKI JV400-130SUV, Operation Manual

Search results

Summary of Contents for JV400-130SUV

Reviews:

Related manuals for JV400-130SUV

Brands by name

Popular brands